Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Do a Shock Absorber Bounce Test

6 stepsTime: 10 minutesEasy

Push down firmly on one corner of the car and release it. A healthy shock absorber lets the body rise and settle in roughly one movement; if it keeps bouncing, that shock may be worn. Combine this with a look for oily leaks and a test drive.

Gloved hands topping up blue washer fluid in an open engine bay during a DIY check

Step by step

  1. 1

    Park on level ground

    Handbrake on.

  2. 2

    Push down on a corner

    Press firmly on the wing or bumper area a few times.

  3. 3

    Release and watch

    Count how many times it rebounds.

  4. 4

    Repeat at each corner

    Compare sides on the same axle.

  5. 5

    Look for leaks

    Oil on the shock body suggests a failed seal.

  6. 6

    Test drive

    Note bouncing after bumps, nose-diving or wallowing.

Common mistakes to avoid

  • Testing only one corner
  • Ignoring a leak because it still feels fine
  • Replacing only one side

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Is the bounce test definitive?

No, it's a quick check. Modern stiff suspensions can hide wear; a garage can test further.

Should shocks be replaced in pairs?

Yes, per axle.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.