Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Spot Worn Tie-Rod Ends

6 stepsTime: 15 minutesEasy

Look for the symptoms first: loose or wandering steering, a knock over bumps, or tyres wearing on one edge. Then check the rubber boots on each tie-rod end for splits. A garage confirms wear by lifting the car and rocking each wheel side to side to feel for play.

Gloved hands topping up blue washer fluid in an open engine bay during a DIY check

Step by step

  1. 1

    Note steering feel

    Is there free play or wandering on straight roads?

  2. 2

    Check tyre edges

    Inner or outer edge wear points to toe changes.

  3. 3

    Find the tie-rod ends

    Behind each front wheel, connecting to the steering arm.

  4. 4

    Inspect the boots

    Splits let dirt in and grease out.

  5. 5

    Listen

    Knocks over bumps or when turning.

  6. 6

    Book a play check

    A garage rocks the wheel at 3 and 9 o'clock on a lift.

Common mistakes to avoid

  • Confusing with wheel bearing play
  • Skipping alignment after replacement

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Are worn tie-rod ends dangerous?

Yes, severe wear affects steering control.

Will replacing them need alignment?

Yes, almost always.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.