Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Replace Windscreen Wiper Blades

6 stepsTime: 5–10 minutesEasy

Lift the wiper arm away from the glass, press the release tab and slide the old blade off the hook, then slide the new blade on until it clicks. Lower the arm gently and test.

Gloved hands topping up blue washer fluid in an open engine bay during a DIY check

Step by step

  1. 1

    Find the right size

    Check the handbook or measure each blade. Driver and passenger sizes often differ.

  2. 2

    Lift the arm

    Some cars need wipers in a service position, set from the stalk or menu.

  3. 3

    Protect the glass

    Lay a towel on the screen in case the arm snaps back.

  4. 4

    Release the old blade

    Press the tab and slide it off the hook.

  5. 5

    Fit the new blade

    Slide on until it clicks.

  6. 6

    Lower and test

    Lower gently and run the wipers with washer fluid.

Common mistakes to avoid

  • Wrong size or adapter
  • Letting the arm snap back
  • Not checking the rear wiper

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

How often should wipers be replaced?

Typically every 6–12 months, or when they smear or chatter.

Why do new blades streak?

Dirty glass or wax. Clean the screen thoroughly.

Are wipers an MOT item?

Yes. They must clear the screen effectively.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.