Step-by-step DIY
How to Check Brake Fluid
Find the brake fluid reservoir (usually at the back of the engine bay on the driver's side), check the fluid is between min and max, and note its colour. A dropping level can mean worn pads or a leak.

Step by step
- 1
Find the reservoir
A small translucent container on top of the brake master cylinder, often with a warning symbol on the cap.
- 2
Read the level
It should be between min and max.
- 3
Check the colour
New fluid is clear to light amber. Dark brown fluid is old.
- 4
Clean before opening
Wipe the cap so dirt can't fall in.
- 5
Top up only to max
Use the DOT type on the cap. If it was very low, get the brakes checked.
Common mistakes to avoid
- Topping up without finding why it's low
- Using the wrong fluid type
- Leaving the reservoir open (fluid absorbs moisture)
Not comfortable doing it yourself?
A local garage can do this quickly. Compare nearby options.
Frequently asked questions
Why is my brake fluid low?
Pads wearing slowly lower it. A sudden drop suggests a leak.
How often should brake fluid be changed?
Many makers say about every two years.
Is clutch fluid the same?
On many manuals the clutch shares the brake reservoir or uses the same fluid.
Related guides
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
