Step-by-step DIY
How to Check Your Car's Suspension
Start with simple checks: does the car sit level, does any corner bounce more than once when pushed, are there oily shock absorbers or broken coil springs, and do you hear clunks or creaks over bumps? A garage can then check joints and bushes for play on a lift.

Step by step
- 1
Check ride height
Measure wheel-arch to ground at each corner on level ground.
- 2
Bounce test
Push down on each corner and watch it settle.
- 3
Look at shocks and springs
Oily shocks, cracked or broken coils.
- 4
Inspect tyres
Cupping or edge wear point to suspension problems.
- 5
Listen on a drive
Clunks, creaks or rattles over bumps and when turning.
- 6
Book a lift inspection
For ball joints, bushes and links.
Common mistakes to avoid
- Ignoring a sagging corner
- Replacing one shock instead of a pair
- Skipping alignment after suspension work
Not comfortable doing it yourself?
A local garage can do this quickly. Compare nearby options.
Frequently asked questions
How long do shocks last?
It varies with roads and loads; check them at services.
Can bad suspension affect braking?
Yes, worn dampers can increase stopping distances.
Related guides
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
