
Quick answer
The most common cause of a clunk over bumps is worn anti-roll bar (drop) links. Worn bushes, ball joints, strut mounts and loose exhaust hangers come next.
- Topic
- Suspension & Steering
- Sections
- 6
- Reading time
- 1 min
- Applies to
- All regions

The most common cause of a clunking noise over bumps is worn anti-roll bar (sway bar) links, also called drop links. Other causes are worn bushes, ball joints, strut top mounts, broken coil springs and a loose exhaust or heat shield.
Is it safe to drive?
Usually, but get it inspected soon. Worn ball joints or a broken spring are safety issues.
Causes at a glance
| Noise | Likely cause |
|---|---|
| Light clunk over small bumps, low speed | Anti-roll bar links |
| Clunk when braking or pulling away | Control arm bushes |
| Clunk with loose steering feel | Ball joints or tie-rod ends |
| Clunk when turning at low speed | Strut top mounts |
| Rattle from underneath | Exhaust hanger or heat shield |
| Sudden bang, car sits low | Broken spring |
Check these in order
- Drive slowly over speed bumps with windows down and note the corner.
- Look at the coil springs for breaks.
- Tap the exhaust (cold) for rattles.
What a mechanic will do
They'll lift the car and lever each joint to check for play, and inspect springs and mounts.
How to prevent problems
- Slow down for speed bumps and potholes.
Related guides
Frequently asked questions
Are drop links expensive?
They're usually one of the cheaper suspension parts and quick to replace on many cars.
Is a clunk over bumps dangerous?
Drop links are usually not urgent. Worn ball joints are a safety issue, so get the source identified.
Why does it only clunk on one side?
Wear is often uneven. The noise usually comes from the side where you hear it, though sound can travel.
Tools that can help
How the parts involved work
Need a mechanic?
Find rated garages near you by city, ZIP code or postcode, with directions.
About this guide
Written by Editorial Team using manufacturer documentation, government road-safety guidance and motoring-organisation advice. It explains likely causes and safe checks. It is not a diagnosis. How we write and check guides.
More suspension & steering guides
Suspension & SteeringCar Suspension and Steering: The Complete Guide to Parts, Problems and Checks
Suspension keeps the tyres pressed to the road and the ride controlled; steering points the wheels where you want to go. This guide explains every main part, the noises and handling changes that signal wear, the checks you can do, and when to see a professional.
Updated November 22, 2026Read
Suspension & SteeringCar Pulls When Accelerating: Causes
Some pull under hard acceleration is normal in powerful front-wheel-drive cars (torque steer). Worn engine mounts, control-arm bushes, uneven tyres or alignment problems make it worse.
Updated November 22, 2026Read
Suspension & SteeringGrinding Noise When Turning: Causes
Grinding while turning often means a failing wheel bearing, worn brake pads, a bent brake dust shield rubbing the disc, or a CV joint that has lost its grease.
Updated November 22, 2026Read