Step-by-step DIY
How to Check Headlight Aim
Park on level ground facing a wall a few metres away, mark the centre of each headlight on the wall, and switch on dipped beam. The top of each beam's cut-off should sit slightly below the marks and be level side to side. If one is high, low or crooked, have them professionally aimed.

Step by step
- 1
Prepare the car
Correct tyre pressures, normal fuel load, driver's seat weighted if possible.
- 2
Face the wall
Park square to the wall at the distance your handbook suggests.
- 3
Mark the centres
Tape a cross at the height and centre of each headlight.
- 4
Switch on dipped beam
Look for the sharp cut-off line.
- 5
Compare
The cut-off should be slightly below the marks and level on both sides.
- 6
Adjust or book
Use the levelling dial if fitted; otherwise ask a garage to aim them.
Common mistakes to avoid
- Testing on a slope
- Forgetting the levelling dial setting
- Aiming with an empty fuel tank and no driver weight
Not comfortable doing it yourself?
A local garage can do this quickly. Compare nearby options.
Frequently asked questions
Why do my headlights dazzle others?
They may be aimed too high, the levelling may be set wrong, or unapproved bulbs may be fitted.
Is headlight aim an MOT item?
Yes, aim is checked in the UK MOT.
Related guides
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
