Skip to content

Red warning light on? Stop safely first, then check what it means.

Brakes system

What Does a Brake Master Cylinder Do?

The brake master cylinder turns the push from your brake pedal into hydraulic pressure. Modern cars use a dual (tandem) design with two separate circuits, so if one leaks, the other still provides some braking.

System
Brakes
Where it is
On the bulkhead in front of the driver, attached to the brake booster
Typical life
Long; seals wear with age and old fluid

How the brake master cylinder works

  1. 01

    The booster pushes the master cylinder pistons

  2. 02

    Pistons pressurise fluid in two circuits

  3. 03

    Pressure travels to the calipers and wheel cylinders

  4. 04

    Springs return pistons when you release the pedal

Signs of a problem

Pedal slowly sinks when heldSoft pedal
Fluid leaking at the back of the cylinder

How to make it last

  • Change brake fluid on schedule to protect seals
  • Never let the reservoir run dry

Frequently asked questions

Why two circuits?

Redundancy: a leak in one circuit leaves the other working.

Does it need bleeding after replacement?

Yes, the whole system is bled.

Guides about this part

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.