
Brakes system
What Does Brake Fluid Do?
Brake fluid carries the pressure from the master cylinder to every brake caliper and wheel cylinder. Because liquid barely compresses, pressing the pedal moves the pistons at the wheels almost instantly. Most fluids absorb moisture over time, which lowers their boiling point.
- System
- Brakes
- Where it is
- Reservoir on the master cylinder; lines and hoses to every wheel
- Typical life
- Many makers specify a change about every two years
How the brake fluid works
- 01
Pressing the pedal moves the master cylinder pistons
- 02
Fluid transmits pressure through the lines
- 03
Caliper pistons push the pads onto the discs
- 04
Releasing the pedal lets fluid flow back
Signs of a problem
How to make it last
- Change fluid at the maker's interval
- Use the DOT type on the reservoir cap
- Keep the reservoir sealed
Frequently asked questions
Why does brake fluid absorb water?
Glycol-based fluids are hygroscopic. Moisture enters through hoses and seals over time.
Is low fluid always a leak?
The level drops slowly as pads wear. A sudden drop means a leak.
Guides about this part
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
