Skip to content

Red warning light on? Stop safely first, then check what it means.

Transmission & Clutch

Why Does My Car Shake When I Accelerate?

By Editorial TeamPublished Updated 2 min read

Part of: Car Shaking or Vibrating: Find the Cause · Transmission Problems: Slipping, Shifting and Leaks

Quick answer

Shaking that appears when you press the accelerator and fades when you lift off usually points to an inner CV joint, worn engine mounts or a misfire under load.

Topic
Transmission & Clutch
Sections
8
Reading time
2 min
Applies to
All regions
Car with its bonnet open in a dimly lit repair workshop
This guide is general information, not a diagnosis. If a warning light is red, the car drives abnormally, or you're unsure, stop safely and have a qualified technician inspect the vehicle.

If your car shakes when you accelerate but smooths out when you lift off the pedal, the force of acceleration is exposing a worn part. The usual causes are a worn inner CV joint, worn engine or gearbox mounts, a misfire under load, or on automatics a torque converter shudder.

Is it safe to drive?

You can usually drive carefully to a garage. If there's loud clunking, the car jerks hard, or the check engine light flashes, stop and get help.

Causes at a glance

Clue Likely cause
Vibration under throttle, gone when coasting Inner CV joint or driveshaft
Clunk when pulling away, engine rocks Engine or gearbox mounts
Check engine light, stumble under load Misfire (plugs, coils)
Rumble-strip feel at light throttle, automatic Torque converter clutch shudder
Rear-wheel drive, vibration at speed Propshaft or universal joints

Check these in order

  1. Scan for codes. Misfire codes P0300–P0308 point to ignition or fuel.
  2. Note when it shakes: pulling away, accelerating at speed, or only uphill.
  3. Check the CV boots behind the front wheels for splits and grease spray.
  4. Watch for engine movement when a helper revs gently in gear with the brakes held.

Causes explained

Inner CV joint

CV joints let the driveshafts deliver power while the suspension moves. Wear in the inner joint shows up as vibration under load.

Engine and gearbox mounts

Under acceleration the engine twists. Worn mounts let it move too far, causing vibration and clunks.

Misfire under load

Weak ignition coils often fail only when cylinder pressure is high, which happens under acceleration.

Torque converter shudder

On some automatics, the lock-up clutch inside the torque converter judders. A fluid change sometimes helps if done early; follow the maker's guidance.

What a mechanic will do

They'll road-test the car, scan for codes, inspect driveshafts and mounts on a lift, and check live misfire data.

What affects the cost

Mounts and spark plugs are moderate jobs. Driveshaft replacement and transmission work cost more.

How to prevent it

  • Have split CV boots replaced quickly, before dirt ruins the joint.
  • Keep up with spark plug and transmission fluid servicing.

Frequently asked questions

What's the difference between inner and outer CV joint symptoms?

A worn outer CV joint usually clicks when turning sharply. A worn inner joint more often causes vibration when accelerating in a straight line.

Can an automatic gearbox cause shudder on acceleration?

Yes. A torque converter clutch shudder feels like driving over rumble strips at light throttle, often at 30–50 mph.

Is shaking on acceleration dangerous?

A badly worn CV joint can eventually fail and leave you stranded. Have it inspected soon.

Tools that can help

How the parts involved work

Need a mechanic?

Find rated garages near you by city, ZIP code or postcode, with directions.

Find a garage

About this guide

Written by Editorial Team using manufacturer documentation, government road-safety guidance and motoring-organisation advice. It explains likely causes and safe checks. It is not a diagnosis. How we write and check guides.

More transmission & clutch guides