Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Change a Headlight Bulb

6 stepsTime: 10–30 minutesModerate

Check the bulb type (e.g. H7), open the bonnet and reach behind the headlamp, remove the cover, unplug the connector, release the clip, fit the new bulb without touching the glass, then reassemble and test.

How to Change a Headlight Bulb

Step by step

  1. 1

    Find the bulb type

    In the handbook or on the old bulb.

  2. 2

    Access the back of the lamp

    Some cars need the battery, airbox or wheel-arch liner moved.

  3. 3

    Remove the cover and connector

    Twist off the cap and unplug.

  4. 4

    Release the clip

    Note how the bulb sits.

  5. 5

    Fit the new bulb

    Hold it by the base. Skin oil on the glass shortens its life.

  6. 6

    Reassemble and test

    Check low and high beam and aim against a wall.

Common mistakes to avoid

  • Touching the glass
  • Fitting LED retrofit bulbs that aren't approved
  • Replacing only one side

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Should I replace both?

Yes, for even brightness and colour.

Is a blown headlight an MOT fail?

Yes.

Why does my new bulb blow quickly?

Touching the glass, poor connections or high voltage from charging faults.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.