Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Check Coolant Level Safely

6 stepsTime: 5 minutesEasy

With the engine completely cold, look at the translucent expansion tank and check the coolant sits between the min and max marks. If low, top up with the coolant type your handbook specifies. Never open the cap when the engine is hot.

Gloved hands topping up blue washer fluid in an open engine bay during a DIY check

Step by step

  1. 1

    Let the engine cool fully

    Wait until the engine is cold, ideally after the car has sat for a few hours.

  2. 2

    Find the expansion tank

    A translucent plastic bottle with min and max marks, usually near the radiator.

  3. 3

    Read the level

    Coolant should sit between the marks.

  4. 4

    Open the cap slowly (cold only)

    Turn it slowly to release any remaining pressure.

  5. 5

    Top up

    Add the correct coolant to the max mark. Don't overfill.

  6. 6

    Look for leaks

    If you keep needing coolant, there's a leak to find.

Common mistakes to avoid

  • Opening the cap when hot
  • Mixing incompatible coolant types
  • Using only water long term
  • Ignoring a level that keeps dropping

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Can I top up with water?

In an emergency, yes, but restore the correct mixture soon.

Why does my coolant level keep dropping?

A leak or, less often, a head gasket problem.

Is the radiator cap the same as the expansion tank cap?

Some cars have both. Check levels at the tank unless the handbook says otherwise.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.