Step-by-step DIY
How to Check Your Engine Oil
Park on level ground with the engine off for a few minutes. Pull the dipstick, wipe it, push it fully back in, pull it out again and read the level between the min and max marks. Top up with the correct grade if needed.

Step by step
- 1
Park level and wait
Switch off and wait a few minutes so oil drains back to the sump. Checking on a slope gives a false reading.
- 2
Find the dipstick
It usually has a bright yellow or orange loop handle. Some cars have no dipstick and show oil level in the dashboard menu.
- 3
Pull, wipe and reinsert
Pull it out, wipe it clean, then push it fully back in.
- 4
Read the level
Pull it out again and look where the oil film stops. It should be between the min and max marks.
- 5
Check the colour
Fresh oil is amber. Dark is normal with use. Milky oil or a burnt smell needs checking.
- 6
Top up if low
Add a little of the grade in your handbook through the filler cap, wait a minute, recheck. Don't overfill.
Common mistakes to avoid
- Checking on a slope
- Overfilling past the max mark
- Using a grade the handbook doesn't specify
- Leaving the filler cap loose
Not comfortable doing it yourself?
A local garage can do this quickly. Compare nearby options.
Frequently asked questions
How often should I check my oil?
Monthly and before long trips.
Should I check oil hot or cold?
Follow your handbook. Many say warm but switched off for a few minutes.
How much oil is between the marks?
On many cars it's about a litre (a quart), but check your handbook.
Related guides
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
