Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Replace a Car Fuse

6 stepsTime: 10 minutesEasy

Switch everything off, find the fuse box diagram in the handbook or lid, pull the fuse for the dead circuit with the plastic puller, check whether its metal strip is broken, and fit a new fuse of exactly the same amp rating. If it blows again, there's a fault to trace.

How to Replace a Car Fuse

Step by step

  1. 1

    Switch off

    Ignition and the affected item off.

  2. 2

    Find the fuse box

    Under the bonnet or inside the cabin; the handbook shows where.

  3. 3

    Identify the fuse

    Use the diagram on the lid or in the handbook.

  4. 4

    Pull and inspect

    A broken strip means it's blown.

  5. 5

    Fit the same rating

    Match the amp number and colour.

  6. 6

    Test

    If it blows immediately, stop and get the circuit checked.

Common mistakes to avoid

  • Higher amp fuse
  • Replacing repeatedly without finding the cause
  • Pulling fuses with the circuit live

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Why does my fuse keep blowing?

A short circuit or a failing component. It needs diagnosis.

Where do I buy fuses?

Parts stores sell mixed packs of common blade fuses.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.