Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Check Tyre Pressure Correctly

6 stepsTime: 10 minutesEasy

Check when tyres are cold, using a reliable gauge. Find the correct pressure on the driver's door jamb placard or in the handbook, not on the tyre sidewall. Press the gauge onto each valve, then inflate or release air to match.

Checking tyre pressure with a dial gauge on the valve

Step by step

  1. 1

    Check when cold

    Before driving, or after the car has been parked for a few hours.

  2. 2

    Find the right figure

    Look on the driver's door jamb, fuel flap or handbook. The sidewall number is the maximum, not the target.

  3. 3

    Remove the valve cap

    Keep it safe.

  4. 4

    Press the gauge on firmly

    A brief hiss is normal. Read the pressure.

  5. 5

    Adjust

    Add air in short bursts, or press the valve pin to release.

  6. 6

    Repeat for all tyres and the spare

    Refit caps.

Common mistakes to avoid

  • Using the sidewall maximum
  • Checking hot tyres
  • Forgetting the spare
  • Ignoring the load figure on the placard

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

How often should I check?

At least monthly and before long trips.

Do I need more pressure for a loaded car?

Many placards list a higher figure for full loads.

Why do pressures drop in winter?

Cold air contracts, lowering pressure.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.