Skip to content

Red warning light on? Stop safely first, then check what it means.

Step-by-step DIY

How to Reset the Tyre Pressure Light

5 stepsTime: 10 minutesEasy

First inflate all tyres (and a monitored spare) to the placard pressure when cold. Then reset the system using the TPMS button or the vehicle settings menu, or drive for a while at steady speed if your car resets automatically.

How to Reset the Tyre Pressure Light

Step by step

  1. 1

    Set pressures cold

    Inflate all tyres to the placard figure.

  2. 2

    Find the reset method

    Button under the dash, in the glovebox, or the settings menu.

  3. 3

    Run the reset

    Hold the button or confirm in the menu until the light blinks or a message appears.

  4. 4

    Drive to recalibrate

    Many indirect systems need 10–30 minutes of driving.

  5. 5

    If it flashes then stays on

    That's a system fault. Have the sensors checked.

Common mistakes to avoid

  • Resetting before inflating
  • Ignoring a flashing light
  • Forgetting the monitored spare

Not comfortable doing it yourself?

A local garage can do this quickly. Compare nearby options.

Find a garage

Frequently asked questions

Why won't my light go off?

A tyre may still be low, a sensor may have failed, or the system needs a relearn.

Do I need a tool after rotating tyres?

Some direct systems need a relearn tool.

Does cold weather trigger it?

Yes. Pressure drops as temperatures fall.

Related guides

General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.