Option A
Synthetic oil
Option B
Conventional oil
Synthetic vs Conventional Oil: Which Should You Use?
Short answer
Use whatever your handbook specifies. Many modern engines require full synthetic. It resists heat, flows better in the cold and lasts longer between changes. Conventional oil costs less and suits some older, simpler engines.

Side-by-side comparison
| Feature | Synthetic oil | Conventional oil |
|---|---|---|
| Base oil | Chemically engineered | Refined crude oil |
| Cold-start flow | Better | Thicker when cold |
| High-heat resistance | Better | Breaks down sooner |
| Typical change interval | Longer (per handbook) | Shorter |
| Cost per change | Higher | Lower |
| Required by many modern engines | Often yes | Rarely |
Why choose Synthetic oil
- Protects turbochargers and hot-running engines
- Flows faster on cold starts
- Supports longer service intervals
Why choose Conventional oil
- Lower cost
- Fine for older engines that specify it
- Widely available
Which should you choose?
Choose Synthetic oil if…
Your handbook specifies a synthetic grade (such as 0W-20 or 5W-30 with a maker approval), you have a turbo, you tow, or you face very hot or very cold weather.
Choose Conventional oil if…
Your older engine specifies conventional oil, and you change it at the shorter interval the handbook gives.
Our verdict
The bottom line
Specification beats preference. Match the viscosity and approval code in the handbook. If both are allowed, synthetic usually gives better protection for the extra cost.
Frequently asked questions
Can I switch from conventional to synthetic?
Yes, in almost all engines, as long as the grade and approval match the handbook.
Is synthetic blend a good middle ground?
It mixes synthetic and conventional base oils. It's fine where the handbook allows it, but it isn't a substitute when full synthetic is required.
Does synthetic oil cause leaks?
Not in a healthy engine. It can reveal existing seal wear on very old engines.
Related guides
More comparisons
General information, not a diagnosis. If a warning light is red, the car drives abnormally or you're unsure, stop safely and have a qualified technician inspect the vehicle.
