Skip to content

Red warning light on? Stop safely first, then check what it means.

Engine Problems

Symptoms of a Bad Ignition Coil

By Editorial TeamPublished Updated 1 min read

Part of: Car Shaking or Vibrating: Find the Cause · Check Engine Light: What It Means and What to Do

Quick answer

A misfire on one cylinder (P0301–P0308), rough idle, a flashing check engine light and loss of power are the classic signs of a failing ignition coil.

Topic
Engine Problems
Sections
8
Reading time
1 min
Applies to
All regions
Car with its bonnet open in a dimly lit repair workshop
This guide is general information, not a diagnosis. If a warning light is red, the car drives abnormally, or you're unsure, stop safely and have a qualified technician inspect the vehicle.

Each ignition coil turns battery voltage into the high voltage that fires a spark plug. Bad ignition coil symptoms include a misfire on one cylinder, rough idle, a flashing check engine light, loss of power and worse fuel economy.

Is it safe to drive?

A steady light with mild roughness: drive gently to a garage. Flashing light: slow down and stop when safe. Unburnt fuel can overheat the catalytic converter.

Symptoms at a glance

Symptom Why
Code P0301–P0308 Misfire on a specific cylinder
Rough idle, shaking One cylinder not firing
Flashing check engine light Active severe misfire
Worse when wet or under load Coil insulation breaking down
Fuel smell from exhaust Unburnt fuel

The swap test

  1. Read the code: for example P0302.
  2. With the engine off, swap that cylinder's coil with a neighbour's.
  3. Clear the code and drive.
  4. If the misfire moves (say to P0303), the coil is faulty.

Why coils fail

Heat, vibration, age, oil leaks into plug wells and worn spark plugs all shorten coil life.

What a mechanic will do

They'll read misfire counters, swap-test or scope-test coils, and inspect plugs.

What affects the cost

Coils on top of the engine are quick to change. Rear coils on some V6 engines take longer.

How to prevent problems

  • Change spark plugs on time.
  • Fix valve cover leaks that let oil into plug wells.

Frequently asked questions

How do I know which coil is bad?

The misfire code usually names the cylinder, such as P0302 for cylinder 2. Swapping that coil with another and seeing if the misfire moves confirms it.

Should I replace all coils at once?

Not always. On high-mileage engines some owners do, as others may be close to failing. Spark plugs are often replaced at the same time.

Can worn spark plugs kill coils?

Yes. Worn plugs need higher voltage, which strains the coils.

Tools that can help

How the parts involved work

Need a mechanic?

Find rated garages near you by city, ZIP code or postcode, with directions.

Find a garage

About this guide

Written by Editorial Team using manufacturer documentation, government road-safety guidance and motoring-organisation advice. It explains likely causes and safe checks. It is not a diagnosis. How we write and check guides.

More engine problems guides