Skip to content

Red warning light on? Stop safely first, then check what it means.

Starting & Battery

Car Battery Voltage Chart: What Your Reading Means

By Editorial TeamPublished Updated 2 min read

Quick answer

A fully charged 12-volt car battery rests at about 12.6 volts. With the engine running, the alternator should hold the system between about 13.5 and 14.5 volts. Readings well below those point to a flat battery or a charging fault.

Topic
Starting & Battery
Sections
6
Reading time
2 min
Applies to
All regions
Car Battery Voltage Chart: What Your Reading Means
This guide is general information, not a diagnosis. If a warning light is red, the car drives abnormally, or you're unsure, stop safely and have a qualified technician inspect the vehicle.

Car battery voltage is the quickest health check you can do with a multimeter. A conventional 12-volt lead-acid car battery is made of six cells, which together give about 12.6 volts at full charge. With the engine running, the alternator's regulator keeps the system between about 13.5 and 14.5 volts to recharge it.

Resting voltage chart (engine off)

Test after the car has been off for a few hours so surface charge has settled.

Reading What it suggests
About 12.6 V or a little above Fully charged
About 12.4 V Partly charged, top up with a drive or charger
About 12.2 V Low, charge it soon
12.0 V or below Discharged, charge and test
Well below 12 V Deeply flat or a failed cell

Exact state-of-charge figures vary by battery type and temperature, so treat the middle rows as a guide. AGM and EFB batteries often rest slightly higher.

Running voltage (engine on)

Reading What it suggests
About 13.5 to 14.5 V Charging system working
Below about 13 V Alternator not charging properly
Well above about 15 V Regulator overcharging, have it checked

If running voltage is low, see symptoms of a bad alternator.

Cranking voltage

While the engine is cranking, voltage dips. A big drop with slow cranking suggests a weak battery or poor connections. Clean corroded terminals first: how to clean battery terminals.

How to take the reading

Our how to test a car battery with a multimeter guide walks through it: set the meter to DC volts, red probe to positive, black to negative.

Voltage isn't everything

A battery can show a good voltage but fail under load because it has lost capacity. If it reads fine but still struggles to start, ask for a load or conductance test.

Frequently asked questions

Why test with the engine off for a while?

Right after driving, the battery shows a temporary surface charge. Waiting gives a truer resting reading.

Can a battery read 12.6 V and still be bad?

Yes. Voltage shows charge, not capacity. A weak battery can read fine but collapse under load. A load test checks that.

Tools that can help

Need a mechanic?

Find rated garages near you by city, ZIP code or postcode, with directions.

Find a garage

About this guide

Written by Editorial Team using manufacturer documentation, government road-safety guidance and motoring-organisation advice. It explains likely causes and safe checks. It is not a diagnosis. How we write and check guides.

More starting & battery guides